Today Qualcomm announced three new SoCs in the mid and low-end Snapdragon lineup. At the lowest end we find the Snapdragon 425 offering a very frugal CPU configuration consisting of 4x Cortex A53's clocked in at 1.4GHz. The chipset is aimed at replacing the Snapdragon 410 and 412 and improves on them with an upgrade on the modem block as well as media decoder and encoder capabilities, now enabling 1080p HEVC decode and encode.

The Snapdragon 435 replaces the Snapdragon 430 which was only announced just a few months ago and also sees an improvement in the modem block used as we see it now going from UE Category 4 to UE Category 7. On the CPU side we see a 200MHz boost in the frequency of the faster of the two quad-core A53 clusters, now reaching 1.4GHz. In both the Snapdragon 425 and 435 we don't see a change in the GPU but it's possible clocks have changed; unfortunately details on the matter are still sparse. Both the Snapdragon 425 and 435 are manufactured on a "28nm LP" process but sadly it wasn't specified which foundry is manufacturing them.

New 2016 Mid & Low-End Snadpragons
SoC Snapdragon 425
(MSM8917)
Snapdragon 435
(MSM8940)
Snapdragon 625
(MSM8953)
CPU 4x A53 @ 1.4GHz 4x A53 @ 1.4GHz

4x A53 @ ? GHz
4x A53 @ 2.0GHz

4x A53 @ ? GHz
Memory 1x 32-bit @ 667MHz
LPDDR3

5.3GB/s b/w
1x 32-bit @ 800MHz
LPDDR3

6.4GB/s b/w
1x 32-bit @ 933MHz
LPDDR3

7.45GB/s b/w
GPU Adreno 308 Adreno 505 Adreno 506
Encode/
Decode
1080p
H.264 & HEVC (Decode)
2160p
H.264 & HEVC (Decode)
Camera/ISP Dual ISP
16MP
Dual ISP
21MP
Dual ISP
24MP
Integrated
Modem
"X6 LTE" Cat. 4
150Mbps DL 75Mbps UL

2x20MHz C.A. 
(DL & UL)
"X8 LTE" Cat. 7
300Mbps DL 100Mbps UL

2x20MHz C.A. 
(DL & UL)
"X9 LTE" Cat. 7
300Mbps DL 150Mbps UL

2x20MHz C.A. 
(DL & UL)
Mfc. Process 28nm LP 14nm LPP

Most importantly comes the announcement of the Snapdragon 625. This is the successor to the Snapdragon 617 which along with the 615 has seen quite a lot of success in mid-range and budget smartphones. The CPUs remain two quad-core clusters of Cortex A53's but now the performance cluster is clocked at up to 2GHz representing a large increase to the 1.5GHz SoCs which the 625 is replacing. The GPU has also been upgraded from an Adreno 405 to a newer generation Adreno 506. The modem again has seen a slight upgrade from an X8 to an X9 block, allowing for an increase in the uplink performance if the network supports it.

The biggest surprise out of today's announcements is the fact that the Snapdragon 625 is manufactured on Samsung's/GlobalFoundry's 14nm LPP process. Qualcomm thus is the first vendor to announce a non-high-end SoC to use a new FinFET manufacturing process which is quite astonishing as I hadn't expected vendors be able to do the migration so early on in the technology's lifetime, which may be a positive indicator that we might be seeing FinFET adopted across the mid-range earlier than expected.

The new SoC should be sampling to vendors in mid-2016 with availability in commercial devices in the second half of 2016.

Source: Qualcomm

Comments Locked

22 Comments

View All Comments

  • LiverpoolFC5903 - Friday, February 12, 2016 - link

    How so? An A53 clocked at 2.2ghz has similar single threaded performance to a Krait 400 clocked at 2.3ghz. That is mid range or more by any standards. Pointless putting an A57 or A72 in there , especially where battery consumption is concerned.

    A A53 based chipset with fast dual channel memory and a good gpu will beat a power hungry a57/72 based soc in terms of the balance between performance and power consumption.

    A vast majority of mainstream smartphone users don't care if their phone posts 100k or whatever on Antutu as long as they get a good user experience. They do care about battery longevity however.

    Currently in ownership of several Android phones, including an S6 and N6p. My meizu mx5 is a better performer than the S6. Nothing on the playstore has brought it to its knees, including heavy games like Nova 3, Mortal Kombat and Asphalt. Loads heavy sites without breaking a sweat. Basically does everything expected of a smartphone. It runs on a "weak" A53 octa Helio X10 clocked at 2.2, a Powervr G6200, and a dual channel DD3 RAM at 933mhz.
  • fteoath64 - Monday, February 15, 2016 - link

    "Qualcomm thus is the first vendor to announce a non-high-end SoC to use a new FinFET manufacturing process which is quite astonishing as I hadn't expected vendors be able to do the migration so early on in the technology's lifetime,"

    Maybe because Sammy is one of the first customers of QC given the Galaxy A9 is using it!. Hence, the drive probably due to Sammy's insistence!.

Log in

Don't have an account? Sign up now