AnandTech Storage Bench - Light

Our Light storage test has relatively more sequential accesses and lower queue depths than The Destroyer or the Heavy test, and it's by far the shortest test overall. It's based largely on applications that aren't highly dependent on storage performance, so this is a test more of application launch times and file load times. This test can be seen as the sum of all the little delays in daily usage, but with the idle times trimmed to 25ms it takes less than half an hour to run. Details of the Light test can be found here.

AnandTech Storage Bench - Light (Data Rate)

Both of the SM2256 drives were near the bottom of the ranking for average data rate on the Light test, and the Intel 540s doesn't improve any. The SP550 had previously performed relatively well for a TLC drive when full, but the latest Phison S10 TLC drives have mostly caught up.

AnandTech Storage Bench - Light (Latency)

The average service time of the Intel 540s is about the same as the SP550 and close to that of most Phison S10 TLC drives, but the Marvell-based TLC drives from SanDisk do significantly better.

AnandTech Storage Bench - Light (Latency)

The frequency of latency outliers for the Intel 540s is a little bit worse than the SP550, but all three Silicon Motion-based drives are at the bottom of the chart.

AnandTech Storage Bench - Light (Power)

The power efficiency of the Intel 540s is quite good overall and well ahead of any other planar TLC drive.

AnandTech Storage Bench - Heavy Random Performance
Comments Locked

77 Comments

View All Comments

  • Drasca - Tuesday, June 28, 2016 - link

    There is a matter of scale. What is efficient for the small scale is not efficient for the large scale deployment.

    > even though it would probably save them a lot of dough

    It wouldn't, it'd create the opposite effect costing them far more in the long run. You're thinking from the personal perspective where maintenence, reliability and security isn't an issue and non critical.

    En mass, it costs them far more to have downtime, maintaining and replacing gear, than it does the initial purchase-- security notwithstanding either. They have to pay people time and money to keep the equipment up, whose price just snowballs as downtime accrues. The initial equipment cost is extremely fractional compared to the human resource cost of dealing with the equipment afterward, keeping track of it, security, physically replacing as it goes down, etc.

    Buying from bulk also guarantees Hp/dell/lenovo has standardized problems and they replace the gear as it breaks wholesale. The equipment is closer to leased than purchased, with basically extended warranty guarantees. Consumer equipment does not have these protections and guarantees.

    It costs far far far more in human resources spending time and money upkeeping a lot of gear that breaks, and all things will eventually break with this many pieces of equipment, taking up space that costs even more money, and causing a clusterfuck when you don't have government contracts.

    The consumer level does not work at the government level and vice versa.

    >entirely new workstation for that user.

    They actually get entirely new workstations, for the most part. . . and old ones are worked to hell until budgets come in and approved for for upgrades across the board.
  • woggs - Thursday, June 23, 2016 - link

    Intel doesn't ship unreliable drives (and will fix an issue if it slips out). That's the one thing you get from intel and is why they can get the big OEM orders. Other than that, I agree with "meh."
  • trparky - Thursday, June 23, 2016 - link

    For Christ's sake, why are we still using Planar NAND? Haven't we learned already that Flash memory at anything smaller than 19nm is just too unreliable? For God's sake! Everyone should be moving to 3D NAND already!
  • trparky - Thursday, June 23, 2016 - link

    Unless it's using 3D NAND, I won't buy it.
  • ClockHound - Thursday, June 23, 2016 - link

    3D? If it's not 4D, I'm not putting precious historically disposable data on it.
  • chrcoluk - Sunday, July 17, 2016 - link

    looks like its planar I am guessing by the small manufacturing size, one of the reasons ofr 3d nand is to use larger manufacturing process which has more reliable flash.

    16nm TLC is too scary for me.
  • euskalzabe - Friday, June 24, 2016 - link

    Agreed. I was on the verge of buying a 512GB X400 but I think I'll wait until the fall, see what 3d NAND comes out...
  • maxxbot - Thursday, June 23, 2016 - link

    Who is this marketed for exactly? The X400 is faster AND cheaper, the 850 EVO is around the same price and much, much faster. It looks like you didn't even read the review.
  • maxxbot - Thursday, June 23, 2016 - link

    As for the reputable company comment, there's already a very reputable company out there that produces drives with much better price/performance: Samsung. Every corporate laptop I have had has had a Samsung SSD, why would they choose lower performance and higher price to go with this drive?
  • alpha754293 - Monday, July 25, 2016 - link

    Sadly though, my Intel 520 series SSDs performed better in random I/O (swapping) than this *NEW* Intel 540 series drive.

    The ONLY thing that has changed is cost. (I can buy a 1 TB 540 series drive at Microcenter for $250, and therefore; the $/GB has come down a LOT since the 520 series days), but for a 5-series drive, it certainly doesn't have the performance to match.

    This was the same problem that I had with the 535 Series as well.

    Whyyy would you release a NEW product that's actually inferior in measurable performance?

    You would think that when you're buying a NEW drive, that you're getting the best that the company has to offer at this level. (Yes, I also have a 750 series PCIe x4 SSD as well, in case you were wondering (or not).)

Log in

Don't have an account? Sign up now