Performance Benchmarks

Our evaluation routine for hard-drive based direct-attached storage devices borrows heavily from the testing methodology for flash-based direct-attached storage devices. The testbed hardware is reused. CrystalDiskMark is used for a quick performance overview. Real-world performance testing is done with our custom test suite involving robocopy bencharks and PCMark 8's storage bench.

CrystalDiskMark uses four different access traces for reads and writes over a configurable region size. Two of the traces are sequential accesses, while two are 4K rando accesses. Internally, CrystalDiskMark uses the Microsoft DiskSpd storage testing tool. The 'Seq Q32T1' sequential traces use 128K block size with a queue depth of 32 from a single thread, while the '4K Q32T1' ones do random 4K accesses with the same queue and thread configurations. The plain 'Seq' traces use a 1MiB block size. The plain '4K' ones are similar to the '4K Q32T1' except that only a single queue and single thread are used.

The first interesting comparison in the table below is between the My Book with the 5400 RPM HelioSeal drive and the G-Technology G-Drive with Thunderbolt over USB 3.0 that employs a 7200 RPM HelioSeal drive. While the 1 MB sequential access traces show the 7200 RPM drive in better light, the use of a bridge chip supporting UASP helps the 5400 RPM My Book pull ahead by a huge margin in the high queue-depth sequential access trace.

HDD-Based Direct-Attached Storage Benchmarks - CrystalDiskMark

The second interesting comparison is between the My Passport and the LaCie Porsche Design Mobile Drive. The Seagate Backup Plus, though being based on the same internal drive as the LaCie Porsche Design Mobile Drive, was evaluated with an older version of CrystalDiskMark / different testbed, and its results are only presented here for the sake of completeness. Going back to the comparison, we find that the different bridge chip configuration, as well as differences in caching and hard drive firmware, make each of the units perform better than the other under different use-case scenarios. That said, the LaCie Porsche Design Mobile Drive performs better overall for this set of artificial benchmark traces.

Moving on to the real-world benchmarks, we first look at the results from our custom robocopy test. In this test, we transfer three folders with the following characteristics.

  • Photos: 15.6 GB collection of 4320 photos (RAW as well as JPEGs) in 61 sub-folders
  • Videos: 16.1 GB collection of 244 videos (MP4 as well as MOVs) in 6 sub-folders
  • BR: 10.7 GB Blu-ray folder structure of the IDT Benchmark Blu-ray (the same that we use in our robocopy tests for NAS systems)

The test starts off with the Photos folder in a RAM drive in the testbed. robocopy is used with default arguments to mirror it onto the storage drive under test. The content on the RAM drive is then deleted. robocopy is again used to transfer the content, but, from the storage drive under test to the RAM drive. The first segment gives the write speed, while the second one gives the read speed for the storage device. The segments end with the purge of the contents from the storage device. This process is repeated thrice and the average of all the runs is recorded as the performance number. The same procedure is adopted for the Videos and the BR folders.

The performance numbers show that the My Passport 4TB performs better than the LaCie Porsche Design Mobile Drive 4TB for reads, while the situation is reversed for writes (which is similar to the behavior we encountered in the CrystalDiskMark traces). The G-Technology G-Drive with Thunderbolt 8TB betters the My Book 8TB consistently even over the former's non-UASP USB 3.0 interface. The Seagate Innov8 is nowhere in the picture because of the Archive HDD inside, but its use-case (bus-powered high-capacity DAS) is quite different compared to the My Book. Readers interested in looking at all the graphs in one shot can choose the 'Expand All' option in the dropdown menu.

Photos Read

High-performance external storage devices can also be used for editing multimedia files directly off the unit. They can also be used as OS-to-go boot drives. Evaluation of this aspect is done using PCMark 8's storage bench. The storage workload involves games as well as multimedia editing applications. The command line version allows us to cherry-pick storage traces to run on a target drive. We chose the following traces.

  • Adobe Photoshop (Light)
  • Adobe Photoshop (Heavy)
  • Adobe After Effects
  • Adobe Illustrator

Usually, PC Mark 8 reports time to complete the trace, but the detailed log report has the read and write bandwidth figures which we present in our performance tables. Note that the bandwidth number reported in the results don't involve idle time compression. Results might appear low, but that is part of the workload characteristic. Note that the same CPU is being used for all configurations. Therefore, comparing the numbers for each trace should be possible across different DAS units. The general trend we observed in the robocopy benchmarks is seen here also. Readers interested in looking at all the graphs in one shot can choose the 'Expand All' option in the dropdown menu below.

Adobe Photoshop Light Read

Introduction and Product Impressions Thermal Aspects and Power Consumption
Comments Locked

35 Comments

View All Comments

  • Samus - Monday, October 17, 2016 - link

    I appreciated Ganesh pointing that out too. Photos next round Ganesh? Also perhaps check if the 3.5" variant can be used internally on an AHCI SATA controller.
  • azrael- - Monday, October 17, 2016 - link

    Hmm... I find the new enclosures more clunky. At least the My Passport 2.5" one. Only upside I see is that they are somewhat more stackable. Not sure that's the intention, though.
  • coburn_c - Tuesday, October 18, 2016 - link

    Adding my two cents. WDC 2.5" drives are utter garbage. Seagate 7200 3TB+ models, especially the Chinese manufactured models are utter garbage. The rest is a lottery.
  • leo321 - Wednesday, July 25, 2018 - link

    When it comes to external hard disk, I always choose western digital. I find the performance better and is compatible with most of the popular platforms. Though I have faced a lot of data loss issue from my HDD. This is very common anyway. I use a Dell laptop. Having installed a <a href="https://www.f2help.com/">Laptop data recovery tool </a> or a software is necessary. HDD is used for backup but users need to think of restoring too.
  • sp00n82 - Saturday, July 20, 2019 - link

    Interestingly, when I used a frequency analyzer app on my mobile to measure the Hertz value for my WD My Book 8 TB (WDC WD80EZAZ-11TDBA0 according to CrystalDiskInfo) it returned a value of 120 Hertz. Which points to a rotation speed of 7200 rpm (7200 rotations per minute / 60 = 120 rotations per second = 120 Hertz).

    Other 5400 rpm drives show a value of the expected 90 Hertz, which indicate that they indeed rotate with "true" 5400 rpm.
    CrystalDiskInfo also shows a rotation speed of 5400 rpm for the My Book in its info, but somehow this doesn't seem to be the case.

Log in

Don't have an account? Sign up now