Specifications and Feature Set Comparison

Prior to getting into the performance evaluation, we will take a look at the specifications of the WD Red Pro 6 TB and see how it compares against the other NAS-specific hard drives that we have looked at before.

The WD Red Pro 6 TB sports a SATA III (6 Gbps) interface. As is customary for the high capacity drives in this market segment, it can only emulate 512-byte sectors (natively 4K). The interesting aspect is the presence of a 128 MB cache similar to the Seagate and HGST drives, and unlike the WD Red. The obvious selling point for its price target is the 7200 RPM speed, which should easily give it the lead in most benchmarks over the WD Red. The other aspects (such as the URE ratings, MTBF, warranty etc.) are as expected for a drive targeting SMBs and SMEs. The table below presents the data for the drive against the others in our evaluation database.

Comparative HDD Specifications
Aspect
Model Number WD6001FFWX WD6001FFWX
Interface SATA 6 Gbps SATA 6 Gbps
Sector Size / AF 512E 512E
Rotational Speed 7200 RPM 7200 RPM
Cache 128 MB 128 MB
Rated Load / Unload Cycles 600 K 600 K
Non-Recoverable Read Errors / Bits Read < 1 in 1014 < 1 in 1014
MTBF 1 M 1 M
Rated Workload ~ 180 TB/yr ~ 180 TB/yr
Operating Temperature Range 5 to 60 C 5 to 60 C
Acoustics (Seek Average - dBA) 34 dBA 34 dBA
Physical Parameters 14.7 x 10.16 x 2.61 cm; 750 g 14.7 x 10.16 x 2.61 cm; 750 g
Warranty 5 years 5 years
Price (in USD, as-on-date) $299 $299

A high level overview of the various supported SATA features is provided by HD Tune Pro.

We get a better idea of the supported features using FinalWire's AIDA64 system report. The table below summarizes the extra information generated by AIDA64 (that is not already provided by HD Tune Pro).

Comparative HDD Features
Aspect
DMA Setup Auto-Activate Supported; Disabled Supported; Disabled
Extended Power Conditions Supported; Disabled Supported; Disabled
Free-Fall Control Not Supported Not Supported
General Purpose Logging Supported; Enabled Supported; Enabled
In-Order Data Delivery Not Supported Not Supported
NCQ Priority Information Supported Supported
Phy Event Counters Supported Supported
Release Interrupt Not Supported Not Supported
Sense Data Reporting Not Supported Not Supported
Software Settings Preservation Supported; Enabled Supported; Enabled
Streaming Not Supported Not Supported
Tagged Command Queuing Not Supported Not Supported
Introduction and Testbed Setup Performance - Raw Drives
Comments Locked

62 Comments

View All Comments

  • Samus - Tuesday, September 8, 2015 - link

    At the current rate, it'll be only a few years before NAND hits parity with magnetic storage in capacity and price.

    3D (verticle) NAND and Intel's 3D X-Point are going to revolutionize storage as we know it.

    X-Point will slowly make NAND a cheap commodity for the consumer sector (abandoned by the enterprise sector for X-Point) and NAND will be so cheap to produce by that point (it's 30 year old technology) that it'll be the common medium. It has already killed virtually every other form of portable storage (floppy disks, tapes, CD/DVD/Bluray, etc) with the only worthy exception being large capacity (2-4TB) 2.5" portable hard disks. It's only a matter of time before 4TB SSD's cost nearly the same as 4TB hard disks, and hard disk platter density is already hit some physical barriers, hence the need for shingled recording and other reliability/performance sacrifices.

    But even then, soon,
  • Souka - Monday, September 7, 2015 - link

    SSDs aren't for NAS due to pricing

    If you put a SSD in, many of the charts would be unreadable due to scaling issues.

    Also, if the NAS is used for large number of writes, the SSD reliability would be a factor
  • melgross - Monday, September 7, 2015 - link

    Reliability would not be a factor. Large financial institutions are using them for transaction processing, and few things require more write reliability than that.
  • FunBunny2 - Tuesday, September 8, 2015 - link

    The advantage of SSD is, according to legend at least, a more consistent life time: just retire them at x% of warranty, less infant mortality and random death (getting run over by a bus, in human terms).
  • MrSpadge - Monday, September 7, 2015 - link

    The strong DAS performance bodes well for the new 6 TB Black model, which is probably physically similar but with different firmware settings.
  • Wwhat - Monday, September 7, 2015 - link

    Why is the article listing the WD red pro with the addition 'star NAS'? Since when is WD using the 'star' term? I can't imagine them doing so, and especially see a company market something with 'red star' these days :)
    A quick web search shows only anadtech adds 'star' the the name.
  • Morawka - Monday, September 7, 2015 - link

    disappointing performance. basically every other nas drive on the market is faster than these. HGST and Seagate dominating.
  • star-affinity - Tuesday, September 8, 2015 - link

    According to the benchmarks in this article – as a DAS drive the WD Red Pro seems nice – but it for some reason seems not as good when used as a NAS drive, agreed on that.
  • Arbie - Monday, September 7, 2015 - link

    We want eight and we won't wait.
  • Gigaplex - Monday, September 7, 2015 - link

    Colour me disappointed that there is no analysis of acoustic behaviour. My NAS is by far the loudest device in my room due to the 4 WD Red (non pro) drives in it, and they're supposed to be one of the quietest drives available.

Log in

Don't have an account? Sign up now