Almost a year ago, we reviewed the HP Z27x monitor, which was a 27-inch display capable of covering a very wide gamut. It had a reasonable 2560x1440 resolution, which was pretty common for this size of display. But at CES 2015, HP announced the HP Z27q monitor, which takes a step back on gamut and manageability, but takes two steps forward with resolution. The HP Z27q is a '5K’ display, which means it has an impressive 5120x2880 resolution. This easily passes the UHD or '4K' levels which are becoming more popular. The HP Z27q is one of a handful of 5K displays on the market now, and HP came in with a pretty low launch price of $1300. When I say pretty low, it’s of course relative to the other 5K displays in the market, but it undercuts the Dell UP2715K by several hundred dollars, even today.

The Z27q lacks some of the management capabilities of it’s Z27x brethren, but it still packs in some powerful features. This is a full 10-bit panel, so it can display 1.07 billion colors. It features a 14-bit 3D Look-Up Table (LUT), and it has settings for both the standard sRGB color space and the wider AdobeRGB color space. It does drop the wide-gamut of the Z27x, which had support for Rec. 2020 (although it can’t reach the full gamut), and there is no option for DCI either. There is an option for BT.709 though, if you need it.

Due to the high resolution, there is no option for HDMI or DVI input. The only inputs are the two DisplayPort connectors required to drive this monitor. As a refresher, DisplayPort 1.2, which is the current standard, has enough bandwidth to run UHD, or 3840x2160 content at 60Hz. In order to drive 5K, or 5120x2800, which is 14.7 million pixels, two DisplayPort 1.2 outputs are tied together to form a single display. 4K and 5K sound awfully similar, but 5K has 78% more pixels than 4K. It takes a lot of bandwidth to drive this. HP does offer a USB hub built in, and it is USB 3.0. The hub has two USB ports on the back of the display, and another two on the left side.

HP 27-Inch 5K Display
Manufacturer Specifications Model Z27q
Video Inputs 2 x DisplayPort 1.2
Panel Type IPS
Pixel Pitch 0.116 mm
Colors 1.07 billion (10 bit panel)
Gamut sRGB
AdobeRGB
BT.709
Brightness 300 cd/m2
Contrast Ratio 1000:1
Response Time 14ms (on/off)
Viewable Size 27-inch
Resolution 5120x2880@60Hz
Viewing Angle 178°/178°
Backlight LED
Screen Treatment Anti-Glare
Height Adjustable 130 mm
Tilt -5° to +22°
Swivel +- 45°
VESA Wall Mounting Yes
Dimensions w/Stand
at maximum height
63.43 x 21.71 x 54.88 cm
24.97 x 8.55 x 21.61 inches
Weight 7.42 kg
16.36 lb
Additional Features 4 x USB 3.0 output
Accessories 2 x DisplayPort Cables
USB 3.0 Cable
All cables 1.8 m

HP uses a pretty decent on-screen display which can be set to either icons or text. I prefer the text mode, but regardless of how you use it, it offers an easy way to set up the color space, adjust the brightness, and set the individual color channels as needed. Since there are no extra inputs, the menu itself is pretty simple.

Pressing any of the buttons opens up the On-Screen Display, and once opened, the bottom of the OSD shows what each button will do. You can set the device to automatically power off and on at certain times of the day, as well as set the target color range. Brightness is of course one of the quick adjustments. You can also check out the input to ensure that you are running at the correct resolution. There are a lot less options here than some monitors, only because there is really only the one input, where as most lower resolution panels may offer selection of any of the inputs and adjustments for each.

All in all, the OSD design is good enough to get the job done. Once configured, you likely won't be in there much.

Design

The design of the HP Z27q is fairly pedestrian, with the monitor built out of flat black plastic. The HP logo is unobtrusive in the centre, and the on-screen menu options are on the right side. If you were wondering how HP was able to undercut the competition, this is one of the areas where they have saved some money. 

The stand easily blends into the background - it is made out of the same plastic material, but it is a fully featured stand. There is tilt, swivel, and height adjustments available. Cable management is a bit sparse, with just a single rectangular slot at the bottom of the stand to route the cables through. If you use the display at maximum height, all of the cables are going to be exposed here, so some more cable management options would be nice, but in the end it’s functional.

The bottom of the display houses the two DisplayPort inputs, as well as a USB 3.0 input, which then branches off to two USB 3.0 ports on the bottom, and two on the left side.

Although the Z27q is just a plain black monitor, the design is very functional, with plenty of adjustments available to suit pretty much any workspace. If the stand is not of your liking, you can of course mount it using a standard VESA mount as well.

Contrast, Brightness and Gamut
Comments Locked

92 Comments

View All Comments

  • Murloc - Tuesday, December 22, 2015 - link

    I think they are not centralized in one HQ so it isn't enough to have "someone" who's good at photography.
  • brucek2 - Thursday, December 24, 2015 - link

    I agree -- the cover photo is so unflattering that it is easily the strongest impression I am taking away from this review, and what I will remember most / the longest. Despite all the text that follows what this article has communicated most forcefully is that "this monitor is a piece of junk." It appears it arrived warped. Unless this is actually the case it is very unfair to the manufacturer.
  • nathanddrews - Tuesday, December 22, 2015 - link

    You should try out the new MadVR build with HDR LUT as part of your monitor reviews. 300 nits is a bit better than the standard 150/200nits of other monitors.
  • CaedenV - Tuesday, December 22, 2015 - link

    So are those extra 1000 pixels of height enough to cram in all of your UI in Adobe so you can edit 4K content while looking at native resolution? Heck at 4K 27" can you even see individual pixels when sitting a normal distance away from the monitor? I am sure that you can't with 5K! That's just ridiculous pixel density. I'm looking at moving to 4K myself and with my own measurements and distance from the screen I am looking at a 48" TV to get slightly higher pixel density without having the scaling issues of Windows... can't imaging how bad scaling would be on such a high res display!
  • MrSpadge - Tuesday, December 22, 2015 - link

    On my 25" DELL with 2560x1440 I can't see individual pixels, whereas at work my 24" 1920x1200 looks a bit gross in comparison, because verything is so large. From my point of view my DELL has pretty much the perfect resolution to (mostly) work without scaling.
  • DanNeely - Tuesday, December 22, 2015 - link

    I can't see the pixels on my 30" 2560x1600 monitor; but the text the 3200x1800 screen of my XPS13 is noticeably sharper due to the higher DPI. Next year's big tech buy for me will probably be a 31.5" 5k monitor.
  • zeeBomb - Tuesday, December 22, 2015 - link

    Damn...a monitor review? By Brett? Is this a fake review!?
  • petteyg359 - Tuesday, December 22, 2015 - link

    Why must they keep pushing huge screens? Give me 4k and 5k in 24" or less so I can actually fit two of them on my desk.
  • ImSpartacus - Tuesday, December 22, 2015 - link

    There are 24" 4k monitors, but you wouldn't want 5k at that size. You'd have to use non-integer scaling to make stuff readable.
  • Murloc - Tuesday, December 22, 2015 - link

    what's the point? Just use windows management software if you can't deal with one big screen.

Log in

Don't have an account? Sign up now