Polaris: Made For FinFET

The final aspect of RTG’s Polaris hardware presentation (and the bulk of their slide deck) is focused on the current generation FinFET manufacturing processes and what that means for Polaris.

As RTG’s slide concisely and correctly notes, the regular march of progress in semiconductor fabrication has quickly tapered off over the last decade. What was once a yearly cadence of new manufacturing processes – a major new node every 2 years with a smaller step in the intermediate years – became just every two years. And even then, after the 20nm planar process proved unsuitable for GPUs due to leakage, we are now to our fifth year of 28nm planar as the leading manufacturing node for GPUs. The failure of 20nm has essentially stalled GPU manufacturing improvements, and in RTG’s case resulted in GPUs being canceled and features delayed to accommodate the unexpected stall at 28nm.

For their most recent generation of products both RTG and NVIDIA took steps to improve their architectural efficiency due to the lack of a new manufacturing process – with NVIDIA having more success at this than RTG – but ultimately both parties were held back from what they originally were planning back around 2010. So to say that the forthcoming move to FinFET for new GPUs is a welcome change is an understatement; after nearly half a decade of 28nm GPUs we finally will see the kind of true generational improvements that can only come from a new manufacturing node.

To no surprise then, RTG is aggressively targeting FinFET with Polaris and promoting the benefits thereof. With power efficiency essentially being the limiting factor to GPU performance these days, the greatest gains can only be reached by improving overall power efficiency, and for RTG FinFETs will be a big part of getting there. Polaris will be the first RTG architecture designed for FinFETs, and coupled with the architecture improvements discussed earlier, it should result in the largest overall increase in performance per watt for any Radeon GPU family.

We’ve already covered the technical aspects of FinFET a number of times before, so I’m not going to go into too much depth here.  But at the most basic level, FinFETs are the solution to the leakage problems that have made planar transistors impractical below 28nm (and ultimately killed 20nm for GPUs). By using multiple fins to essentially make a transistor 3D, it becomes possible to control leakage in a manner not possible with planar transistors, and that in turn will significantly improve energy efficiency by reducing the amount of energy a GPU wastes just to be turned on.

With the introduction of FinFET manufacturing processes, GPU manufacturing can essentially get back on track after the issues at 20nm. FinFETs will be used for generations to come, and while the initial efficiency gain from adding FinFETs will likely be the single greatest gain, it solves the previous leakage problem and gives foundries a route to 10nm and beyond. At the same time however as far as the Polaris GPUs are concerned, it should be noted that the current generation of 16nm/14nm FinFET processes are not too far removed from 20nm with FinFETs. Which is to say that the move to FinFETs gets GPU manufacturing back on track, but it won’t make up for lost time. 14nm/16nm FinFET is essentially only one generation beyond 28nm by historical performance standards, and the gains we're expecting from the move to FinFET should be framed accordingly.

As for RTG’s FinFET manufacturing plans, the fact that RTG only mentions “FinFET” and not a specific FinFET process (e.g. TSMC 16nm) is intentional. The group has confirmed that they will be utilizing both traditional partner TSMC’s 16nm process and AMD fab spin-off (and Samsung licensee) GlobalFoundries’ 14nm process, making this the first time that AMD’s graphics group has used more than a single fab. To be clear here there’s no expectation that RTG will be dual-sourcing – having both fabs produce the same GPU – but rather the implication is that designs will be split between the two fabs. To that end we know that the small Polaris GPU that RTG previewed will be produced by GlobalFoundries on their 14nm process, meanwhile it remains to be seen how the rest of RTG’s Polaris GPUs will be split between the fabs.

Unfortunately what’s not clear at this time is why RTG is splitting designs like this. Even without dual sourcing any specific GPU, RTG will still incur some extra costs to develop common logic blocks for both fabs. Meanwhile it's also not clear right now whether any single process/fab is better or worse for GPUs, and what die sizes are viable, so until RTG discloses more information about the split order, it's open to speculation what the technical reasons may be. However it should be noted that on the financial side of matters, as AMD continues to execute a wafer share agreement with GlobalFoundries, it’s likely that this split helps AMD to fulfill their wafer obligations by giving GlobalFoundries more of AMD's chip orders.

Closing Thoughts

And with that, we wrap up our initial look at RTG's Polaris architecture and our final article in this series on RTG's 2016 GPU plans. As a high level overview what we've seen so far really only scratches the surface of RTG's plans - and this is very much by design. But as the first occasion of RTG opening up their roadmaps and giving us a bit of a look into the future, it's a welcome change not only for developers, but for the press and public alike. 

Backed by the first major node shrink for GPUs in over 4 years, RTG has laid out an aggressive plan for Polaris in 2016. At this point RTG needs to catch up and close the market share gap with NVIDIA - of this RTG is quite aware - and Polaris will be the means to do that. What needs to happen now is for RTG to fully execute on the plans they've laid out, and if they can do so then 2016 should turn out to be an interesting (and competitive) year in the GPU industry.

Polaris: A High Level Look
Comments Locked

153 Comments

View All Comments

  • jasonelmore - Tuesday, January 5, 2016 - link

    yeah that doesnt matter.

    AMD Paid DICE thousands of dollars to prefer their architecture over nvidia when the Mantle deal went down.
  • Daniel Egger - Monday, January 4, 2016 - link

    "primitive discard accelerator". Not sure I'd use the ambiguous word primitive in that context...
  • looncraz - Monday, January 4, 2016 - link

    Yeah, I first read "Primitive" as "Crude" until I realized they were talking about graphics primitives.
  • Daniel Egger - Monday, January 4, 2016 - link

    AMD, err, RTG -- if you're reading this: Please take my free recommendation to use the plural of primitive, i.e. primitives discard accelerator, instead. Thanks.
  • extide - Monday, January 4, 2016 - link

    Now, that, I can support!
  • extide - Monday, January 4, 2016 - link

    Primitive is not an ambiguous term in this case. It is talking about geometry early in the pipeline.

    Funny how so many commenters complain about this site being dumbed down lately, and then we they use some real words people also complain.

    Sheesh!
  • DominionSeraph - Monday, January 4, 2016 - link

    You don't want to use the word "primitive" anywhere near a description of your next generation tech product. This is a marketing slide by AMD, not a whitepaper. So please take your stupidity somewhere else.
  • BehindEnemyLines - Monday, January 4, 2016 - link

    The audience isn't the average Joe. It's a technology submit, so the slides are geared for someone who understand a bit more technical jargon.
  • zeeBomb - Monday, January 4, 2016 - link

    14nm Finfet. Awesome.
  • bodonnell - Monday, January 4, 2016 - link

    Finally! We've been stuck at 28nm for too long. I hope this finally gives me a reason to upgrade my 4 year old GPU. I'm thinking about switching my main monitor from 1080p to 1440p this year and whoever (AMD or Nvidia) has the best bang for my buck at that resolution will get my money.

Log in

Don't have an account? Sign up now